J'ai voulu suivre ce tutoriel pour installer le...

[bigboss60]

voici mon smb.conf:


#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = dury

# server string is the equivalent of the NT Description field
   server string = Sweb02

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# If we receive WINS server info from DHCP, override the options above.
   include = /etc/samba/dhcp.conf

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
   interfaces = 10.1.1.154

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
;   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
   passdb backend = tdbsam

   obey pam restrictions = yes

;   guest account = nobody
   invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
;   unix password sync = no

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *EntersnewsUNIXspassword:* %nn *RetypesnewsUNIXspassword:* %nn *passwordsupdatedssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
;   pam password change = no

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \%Nprofiles%U
# Another common choice is storing the profile in the user's home directory
;   logon path = \%N%Uprofile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
;   logon home = \%N%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser –quiet –disabled-password –gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

# When using [print$], root is implicitly a 'printer admin', but you can
# also give this right to other users to add drivers and set printer
# properties
;   printer admin = @ntadmin


############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash
;
; The following was the default behaviour in sarge
; but samba upstream reverted the default because it might induce
; performance issues in large organizations
; See #368251 for some of the consequences of *not* having
; this setting and smb.conf(5) for all details
;
;   winbind enum groups = yes
;   winbind enum users = yes

#======================= Share Definitions =======================

wins support = no
[homes]
   comment = Home Directories
   browseable = no

# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
   writable = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# Restrict access to home directories
# to the one of the authenticated user
# This might need tweaking when using external authentication schemes
   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
[netlogon]
   comment = Network Logon Service
   path = /home/samba/netlogon
   guest ok = yes
   writable = yes
   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
available = no
browseable = no
public = no
[profiles]
   comment = Users profiles
   path = /home/samba/profiles
   guest ok = no
   browseable = no
   create mask = 0600
   directory mask = 0700

available = no
public = no
writable = no
[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   public = yes
   writable = yes
   create mode = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
;   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
[cdrom]
   comment = Samba server's CD-ROM
   writable = no
   locking = no
   path = /cdrom
   public = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#   cdrom share is accesed. For this to work /etc/fstab must contain
#   an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#   is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom


available = no
browseable = no
[appli]
path = /root
comment = Dossier partagé
available = yes
browseable = yes
public = yes
writable = yes

[home]
path = /home
comment = dossier partager
available = yes
browseable = yes
public = yes
writable = yes

[bigboss60]

et voici mon file server.xml :



<alfresco-config area="file-servers">



   <config evaluator="string-compare" condition="CIFS Server">

     <serverEnable enabled="true"/>

      <host name="${localname}_A" domain="DURY"/>

      <comment>Alfresco CIFS Server</comment>



      <!– Set to the broadcast mask for the subnet –>

      <broadcast>10.1.1.255</broadcast>
      <bindto>10.1.1.155<bindto>



      <!– Use Java socket based NetBIOS over TCP/IP and native SMB on linux –>

      <tcpipSMB platforms="linux,solaris,macosx"/>

      <netBIOSSMB platforms="linux,solaris,macosx"/>



      <!– Can be mapped to non-privileged ports, then use firewall rules to forward

          requests from the standard ports –>

     <!–      

      <tcpipSMB port="1445" platforms="linux,solaris,macosx"/>

      <netBIOSSMB sessionPort="1139" namePort="1137" datagramPort="1138" platforms="linux,solaris,macosx"/>

     –>

      

      <hostAnnounce interval="5"/>



      <!– Use Win32 NetBIOS interface on Windows –>

      <Win32NetBIOS/>

      <Win32Announce interval="5"/>



<!–

      <WINS>

         <primary>1.2.3.4</primary>

         <secondary>5.6.7.8</secondary>

      </WINS>

–>

      <sessionDebug flags="Negotiate,Socket"/>

   </config>



   <config evaluator="string-compare" condition="FTP Server">

     <serverEnable enabled="true"/>

<!–      <debug flags="File,Search,Error,Directory,Info,DataPort"/> –>

   </config>

  

   <config evaluator="string-compare" condition="NFS Server">

     <serverEnable enabled="true"/>

   </config>

   

   <config evaluator="string-compare" condition="Filesystems">

     <filesystems>

       

       <!– Alfresco repository access shared filesystem –>

         <filesystem name="Alfresco">

            <store>workspace://SpacesStore</store>

            <rootPath>/app:company_home</rootPath>



         <!– Add a URL file to each folder that links back to the web client –>

         <urlFile>

               <filename>__AlfrescoClient.url</filename>

               <webpath>http://${localname}:8080/alfresco/</webpath>

            </urlFile>



         <!– Mark locked files as offline –>

          <offlineFiles/>



         <!– Desktop actions –>

         <!– Uses a client-side application to trigger a server-side action                         –>

         <!–   Echo - displays a message echoed from the server                                     –>

         <!–   URL  - launches a URL via the Windows shell                                          –>

         <!–   CmdLine - launches the Notepad application                                           –>

         <!–   CheckInOut - checks files in/out, drag and drop files onto the application           –>

         <!–   JavaScript - run a server-side script                                                –>

         <!–   JavaScriptURL - server-side script that generates a URL to the folder using a ticket –>

         <!–                   to avoid having to logon                                             –>



<!–

         <desktopActions>

            <global>

                    <path>alfresco/desktop/Alfresco.exe</path>

               <webpath>http://${localname}:8080/alfresco/</webpath>

            </global>

            <action>

               <class>org.alfresco.filesys.smb.server.repo.desk.EchoDesktopAction</class>

               <name>Echo</name>

                 <filename>__AlfrescoEcho.exe</filename>

            </action>

            <action>

               <class>org.alfresco.filesys.smb.server.repo.desk.URLDesktopAction</class>

               <name>URL</name>

                 <filename>__AlfrescoURL.exe</filename>

            </action>

            <action>

               <class>org.alfresco.filesys.smb.server.repo.desk.CmdLineDesktopAction</class>

               <name>CmdLine</name>

                 <filename>__AlfrescoCmd.exe</filename>

            </action>

            <action>

               <class>org.alfresco.filesys.smb.server.repo.desk.CheckInOutDesktopAction</class>

               <name>CheckInOut</name>

                 <filename>__AlfrescoCheckInOut.exe</filename>

            </action>

            <action>

               <class>org.alfresco.filesys.smb.server.repo.desk.JavaScriptDesktopAction</class>

               <name>JavaScript</name>

               <filename>__AlfrescoScript.exe</filename>

               <script>alfresco/desktop/dumpRequest.js</script>

               <attributes>anyFiles, multiplePaths , allowNoParams</attributes>

               <preprocess>confirm, copyToTarget</preprocess>

            </action>

            <action>

               <class>org.alfresco.filesys.smb.server.repo.desk.JavaScriptDesktopAction</class>

               <name>JavaScriptURL</name>

               <filename>__AlfrescoDetails.exe</filename>

               <script>alfresco/desktop/showDetails.js</script>

               <attributes>anyFiles</attributes>

               <preprocess>copyToTarget</preprocess>

            </action>



         </desktopActions>

–>         

                   

<!–

            <accessControl default="Write">

               <user name="admin" access="Write"/>

               <address subnet="90.1.0.0" mask="255.255.0.0" access="Write"/>

            </accessControl>

–>

         </filesystem>

       

       <!– AVM virtualization view of all stores/versions for WCM –>

         <avmfilesystem name="AVM">

            <virtualView/>

         </avmfilesystem>

       

      </filesystems>

   </config>



   <config evaluator="string-compare" condition="Filesystem Security">

      <authenticator type="enterprise">

      </authenticator>



<!–

      <globalAccessControl default="None">

         <user name="admin" access="Write"/>

         <address ip="90.1.0.90" access="Write"/>

      </globalAccessControl>



      <users>

         <localuser name="user">

            <password>user</password>

            <comment>Normal user account</comment>

         </localuser>

   

         <localuser name="administrator">

            <password>admin</password>

            <administrator/>

            <comment>Administrator account</comment>

         </localuser>

      </users>

–>

   </config>





</alfresco-config>

[dbaran]

As tu fais un alias sur la carte réseau de ton serveur?
Le ping sur les IP 10.1.1.154 et 10.1.1.155 fonctionnent?

[bigboss60]

commnt fait on un alias sur la carte réseau? et le ping sur 10.1.1.155 ne fonctionne pas

[dbaran]

cf. google search: http://www.google.fr/search?q=network+alias
par exemple: http://www.cyberciti.biz/faq/linux-creating-or-adding-new-network-alias-to-a-network-card-nic/

[bigboss60]

SInon pour créer un alias, vu que je suis sous DEbian je peux aller dans bureau,administration et réseau et la je vais dans l'onglet hotes et je peux créer des alias, sur quel adresse ip dois-je créer un alias? Merci de votre aide au fait est-ce normal que l'adresse 10.1.1.155 ne réponde pas?

[bigboss60]

Je vous ai rajouté le ifconfig ca peut aussi servir pour y voir plus clair

Sweb02:~# ifconfig eth0
eth0      Lien encap:Ethernet  HWaddr 00:04:76:19:870
          inet adr:10.1.1.154  Bcast:10.1.255.255  Masque:255.255.0.0
          adr inet6: fe80::204:76ff:fe19:87d0/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12889 errors:0 dropped:0 overruns:1 frame:0
          TX packets:1332 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:1908195 (1.8 MiB)  TX bytes:264135 (257.9 KiB)
          Interruption:5

[dbaran]

C'est sur l'interface réseau qu'il faut créer un alias… et non sur une IP.
C'est pour que ton interface réseau (eth0 en général) soit associée tant à 10.1.1.154 et 10.1.1.155.

Si tu n'as pas créé d'alias, oui, c'est normal que 10.1.1.155 ne réponde pas.

[bigboss60]

Je suis en train de pensé, si Samba ne fonctionne plus, je ne pourrais plus accéder à mon alf_data qui est stocké sur un serveur nas et j'ai besoin de samba pour pouvoir les faire communiquer, c'est pour ca que je n'arrive plus a accéder à Alfresco c'est parce que j'ai un souci au niveau de samba maintenant. qu'en pensez vous? Je pense de mon côté que Le cifs est correctement paramétrer mais le souci visn du smb.conf et de l'alias de la carte réseau je pense. J'ai regardé la doc que vous m'avez fourni mais j'ai un peu de mal à comprendre ce qui est dis :/ . j'ai vu votre dernier message qui me dis que je dois créer un alias sur eth0 don je met en adresse ip 10.1.1.155 et en alias eth0 et aussi 10.1.1.154 et en alias eth0 aussi? c bien ca? Merci beaucoup de votre aide

[dbaran]

Désolé pour la remarque, mais si tu pouvais te relire avant de poster, ça m'éviterais de te relire trois fois avant de comprendre à cause des répétitions dans les phrases:

…je dois créer un alias sur eth0 don je met en adresse ip 10.1.1.155 et en alias eth0 et aussi 10.1.1.154 et en alias eth0 aussi?…

Je ne comprend pas l'intérêt de Samba entre ton serveur Alfresco et ton serveur NAS. Ta configuration est-elle bien la suivante:
- Serveur NAS contient alf_data
- Alfresco sur un autre serveur, configuré pour faire pointer root.dir sur ton serveur NAS

Pourquoi aurais-tu besoin de Samba sur ton serveur Alfresco pour accéder à un partage du serveur NAS?